...
- Configuring New Backup
- Connect the USB stick to the appliance and start the system from the USB stick
- After successful installation unplug the USB stick and restart the system
- In the initial configuration, the backup can now be imported directly
- Adjust network settings
- Restore the server license and have it confirmed by STARFACE Partner
Note to the Compact v3
This appliance can only be installed with version 6.5.0.30 and higher. Installation with a lower version is not possible!
Note to the Pro v6
This appliance can only be installed with version 6.5.0.30 and higher. Installation with a lower version is not possible!
Note to the Advanced v6
This appliance can only be installed with version 6.5.0.30 and higher. Installation with a lower version is not possible!
Note to the Enterprise v5
If an Enterprise v5 is not automatically booted from the USB stick for a new installation, press the <F7> key to call up the boot menu and manually select the USB stick. The reinstallation of Enterprise v5 can then be started via the following item in the boot menu:
Install new system (Enterprise v5 / Platinum v5)
Note to the LED status
The current status of the installation can be checked on appliance without monitor output on the status LED on the front panel.
...
After restarting the system without a USB stick, an orange LED indicates the ready state and access to the web interface is possible.
Note to the BIOS update
Should encounter the following error message during installation:
...
to abort the installation process, a BIOS update must be made.
Note about the update of version 5.3
A STARFACE appliance with version 5.3 must be reinstalled to get to one of the higher versions. This is due to extensive updates of the underlying software. It should also be noted that the following two appliance types are only supported up to version 5.3:
...