To
...
enable
...
the
...
logging
...
of
...
the
...
SIP
...
packets
...
on
...
the
...
STARFACE,
...
the
...
following
...
steps
...
must
...
be
...
performed:
Connect
via
ssh
to
STARFACE
- Login
Login with the root user (see also "Password for the
root user Enter command "asterisk -rvvvv" (without quotation marks) and confirm with Enter key
Enable logging of SIP packets
Various
...
commands
...
are
...
available
...
for
...
activating
...
the
...
SIP
...
packet
...
logging:
Syntax | Beschreibung |
---|---|
sip set debug | Logging of all received and sent SIP packets (up to version 5 of STARFACE) |
sip set debug on | Logging of all received and sent SIP packets (from version 6 of STARFACE) |
sip set debug ip IP-Adresse | Only SIP packets received from the IP address and sent to the IP address will be logged. |
sip set debug peer Peer-Name | Only SIP packets received by this peer and sent to this peer are logged. |
sip set debug off | Deactivation of the entire SIP logging |
...
The SIP packages can also be viewed in the full logfile in the STARFACE web interface (see also "View log files Viewing Log Files on the STARFACE web interfaceWeb Interface").
Hinweis |
---|
Note: The activated SIP logging writes large amounts of data into the PBX logfile, so it is recommended that logging should only be activated in a targeted manner and not run continuously. |
...