...
Connect via ssh to STARFACE- Login Login with the root user (see also "Password for the root userRoot User")
- Enter command "asterisk -rvvvv" (without quotation marks) and confirm with Enter key
- Enable logging of SIP packets
Various commands are available for activating the SIP packet logging:| Syntax | Beschreibung |
|---|---|
| sip set debug | Logging of all received and sent SIP packets (up to version 5 of STARFACE) |
| sip set debug on | Logging of all received and sent SIP packets (from version 6 of STARFACE) |
| sip set debug ip IP-Adresse | Only SIP packets received from the IP address and sent to the IP address will be logged. |
sip set debug peer Peer-Name | Only SIP packets received by this peer and sent to this peer are logged. |
sip set debug off | Deactivation of the entire SIP logging |
...
The SIP packages can also be viewed in the full logfile in the STARFACE web interface (see also "View log files Viewing Log Files on the STARFACE web interfaceWeb Interface").
| Hinweis |
|---|
Note: The activated SIP logging writes large amounts of data into the PBX logfile, so it is recommended that logging should only be activated in a targeted manner and not run continuously. |
...